TS110-AP Pressure Gauge Horizontal Meter Head (G1/2, Flat Diaphragm, Three Cooling Fins)

Description

Product Introduction

TS110-AP Pressure Gauge Horizontal Meter Head (G1/2, Flat Diaphragm, Three Cooling Fins) is a flat diaphragm pressure transmitter designed for direct pressure measurement of gases and liquids compatible with 316L stainless steel.

The flush diaphragm structure allows the sensing surface to directly contact the measured medium, helping reduce the risk of scaling, adhesion and clogging associated with viscous or particulate-containing media. The cavity-free stainless steel construction also provides a practical solution for applications where easy cleaning and reduced media accumulation are important.

The TS110-AP series supports a wide measurement range from -100kPa to 60MPa and provides multiple output options, including 4–20mA, 0–5V, 0–10V and 4–20mA + HART. Different electrical and process connection configurations are available to accommodate various installation requirements.

Danrui Sensor (Suzhou) Co., Ltd. manufactures pressure measurement products with in-house R&D, production and sales teams, supporting both standard and customized pressure transmitter requirements.

Product Highlights

Flat Diaphragm Structure

The TS110-AP uses a flush diaphragm to directly sense process pressure. The flat sensing structure helps reduce media accumulation and is particularly suitable for viscous, adhesive or clogging-prone media.

Cavity-Free Stainless Steel Design

The integrated stainless steel cavity-free structure minimizes recessed areas around the pressure sensing surface. This design can help reduce scaling and material retention in applicable process environments.

Wide Pressure Measurement Range

The available measurement range extends from -100kPa to 60MPa, allowing the series to cover a broad selection of pressure measurement applications.

Multiple Output Signals

Depending on the selected configuration, output options include:

• 4–20mA

• 0–5V

• 0–10V

• 4–20mA + HART

This allows the transmitter to integrate with different control, monitoring and instrumentation systems.

Multiple Pressure Connections

Available pressure connection options include M20×1.5 and clamp-type connections, with customized connection configurations available according to application requirements.

Clamp options include ISO 1S, 1.5S and 2S configurations.

Multiple Electrical Connections

The TS110-AP supports different electrical connection configurations, including vertical and horizontal M12×1 aviation connectors and Hirschmann connectors.

High Measurement Accuracy

Depending on the selected version, overall accuracy is available at 0.15% FS, 0.25% FS or 0.5% FS, providing options for different measurement requirements.

Resistance to Interference

The transmitter is designed for resistance to variable-frequency and RF signal interference, supporting stable measurement in industrial environments with electrical interference.

High Temperature Capability

The operating temperature range is -20 to 150°C. For applications involving higher-temperature media or specific installation conditions, appropriate cooling devices or remote sealing configurations may be required.

Long-Term Stability

The specified long-term stability is 0.15% per year, supporting consistent pressure measurement over extended operating periods.

Product Specifications

Item	Specification
Product Name	TS110-AP Pressure Gauge Horizontal Meter Head
Series	TS110-AP
Product Type	Flat Diaphragm Pressure Transmitter
Diaphragm Type	Flush / Flat Diaphragm
Material	316L Stainless Steel Compatible
Measurement Range	-100kPa to 10kPa … 60MPa
Supply Voltage	9–36V DC
Typical Supply Voltage	24V DC
Output	4–20mA / 0–5V / 0–10V / 4–20mA + HART
Accuracy	0.15% FS / 0.25% FS / 0.5% FS
Measured Medium	Gases and liquids compatible with 316L stainless steel
Long-Term Stability	0.15% per year
Operating Temperature	-20 to 150°C
Compensated Temperature	-20 to 60°C
Pressure Connection	M20×1.5 / Clamp / Customized
Clamp Options	ISO 1S / 1.5S / 2S
Electrical Connection	M12×1 Aviation Connector / Hirschmann Connector
Vibration	No change at 20g RMS, 100–1000Hz
Shock	200g, 10ms
Insulation Resistance	100MΩ / 100V DC
Resolution	Typically 1/100,000
Output Impedance	5kΩ / 100V DC
Temperature Coefficient	0.5 × 10⁻⁴/°C FS

The final pressure range, output, connection, accuracy and other specifications should be confirmed according to the selected configuration before ordering.

Pressure Measurement Range

The TS110-AP series supports pressure measurement configurations from vacuum/negative pressure ranges through positive pressure applications, with the maximum specified range reaching 60MPa.

Available range selection depends on the required pressure measurement point and transmitter configuration. Buyers should provide the required pressure range when requesting a quotation to ensure the appropriate model configuration is selected.

Output Options

The transmitter can be configured with different output signals to match various control and data acquisition systems.

4–20mA: A commonly used industrial analog signal for process control and monitoring systems.

0–5V: Suitable for compatible voltage-input instrumentation and control systems.

0–10V: Provides a voltage output option for applicable industrial measurement and automation systems.

4–20mA + HART: Combines a standard current output with HART communication for applications requiring additional configuration or digital communication functions.

Pressure Connection Options

The TS110-AP supports M20×1.5 and clamp-type pressure connections. Clamp configurations include ISO 1S, 1.5S and 2S options.

Customized pressure connections can also be discussed according to equipment interface and process piping requirements.

The appropriate connection should be selected based on the existing pipeline, equipment interface, sealing requirements and measured medium.

Electrical Connection Options

Available electrical connection configurations include:

• M12×1 aviation connector for vertical mounting

• M12×1 aviation connector for horizontal mounting

• Hirschmann connector

The electrical connection should be selected according to installation space, wiring requirements and the customer's existing control system.

Applications

The flat diaphragm structure makes the TS110-AP suitable for applications where conventional pressure connections may be affected by viscous media, deposits or clogging.

Food & Beverage

The flush diaphragm structure can be used in applicable food and beverage process control systems where a flat sensing surface is beneficial for cleaning and reducing material accumulation.

Pharmaceutical Industry

The transmitter can be used for applicable pharmaceutical process pressure measurement applications requiring suitable connection and diaphragm configurations.

Brewing

The TS110-AP is suitable for selected brewing process control applications involving liquids that may cause buildup or adhesion around conventional pressure sensing structures.

Chemical Industry

For compatible gases and liquids, the transmitter can be used for industrial process pressure monitoring and control.

Petroleum Industry

The transmitter can be applied to pressure measurement and process control systems in petroleum-related equipment and pipelines where the selected material and pressure range are suitable.

General Process Control

The TS110-AP can be integrated into industrial process control, monitoring and automation systems for pressure measurement.

Suitable Media

The standard transmitter is designed for gases and liquids compatible with 316L stainless steel.

For corrosive media or specialized process conditions, material selection should be evaluated according to the chemical properties, concentration, temperature and pressure of the measured medium.

For highly corrosive applications, alternative diaphragm or isolation materials such as Hastelloy, tantalum or PTFE-coated solutions may be considered where supported by the required configuration.

Selection Guide

Selecting the appropriate pressure transmitter requires consideration of the measured medium and operating conditions.

For corrosive media: Consider suitable corrosion-resistant diaphragm or isolation materials, such as Hastelloy, tantalum or PTFE-coated options where applicable.

For high-temperature media above 100°C: Cooling devices or capillary remote seals may be required depending on the actual process temperature and installation arrangement.

For viscous or crystallizing media: A flush diaphragm or suitable flange-type pressure transmitter is recommended to reduce the possibility of impulse line blockage and material accumulation.

For general gases and water: A standard stainless steel diaphragm configuration can be considered when the medium is compatible with the selected materials.

Industrial Performance

The TS110-AP is designed for demanding industrial measurement environments. Its stated vibration performance shows no change under 20g RMS, 100–1000Hz, while the specified shock resistance is 200g, 10ms.

The transmitter also provides an insulation resistance of 100MΩ / 100V DC, supporting electrical reliability in applicable installations.

Quality Control & Testing

Danrui Sensor (Suzhou) Co., Ltd. states that each pressure transmitter undergoes 100% factory testing before shipment.

The testing process includes:

• High-temperature burn-in testing

• Accuracy calibration

• Functional validation

• Production data tracking

• Batch traceability through MES

The company's MES Manufacturing Execution System records production data from each manufacturing stage, providing traceability for individual batches.

This testing and tracking process is intended to verify product performance before shipment and support consistent quality control.

Manufacturing & Technical Support

Danrui Sensor operates its own R&D, production and sales teams and provides pressure measurement products for industrial applications.

Customers can discuss pressure range, accuracy, output signal, pressure connection, electrical connection, measured medium and operating temperature when selecting a TS110-AP configuration.

Customized configurations can be evaluated according to the actual installation and process requirements.

B2B Ordering Information

For accurate model selection, buyers should provide the following information:

• Required pressure measurement range

• Positive or negative pressure application

• Accuracy requirement

• Measured medium

• Operating temperature

• Required output signal

• Pressure connection

• Electrical connection

• Installation orientation

• Quantity

• Special environmental requirements

Providing complete technical information helps determine the appropriate transmitter configuration and connection type.

MOQ & Supply

The TS110-AP is available without a minimum order quantity requirement. The stated minimum shipment quantity is 1 piece, making it suitable for sample evaluation, replacement requirements, engineering projects and bulk procurement.

A standard warranty period of 12 months from the date of shipment is provided according to the supplied product information.

FAQ

Q: Is Danrui Sensor a manufacturer or trading company?

A: Danrui Sensor (Suzhou) Co., Ltd. states that it is a manufacturer with its own R&D, production and sales teams.

Q: What is the minimum order quantity?

A: There is no MOQ requirement. The stated minimum shipment quantity is 1 piece.

Q: What is the pressure range of the TS110-AP?

A: The available measurement range is from -100kPa to 60MPa, with the exact range depending on the selected configuration.

Q: What output signals are available?

A: Available outputs include 4–20mA, 0–5V, 0–10V and 4–20mA + HART.

Q: What accuracy options are available?

A: Overall accuracy options include 0.15% FS, 0.25% FS and 0.5% FS.

Q: Can the TS110-AP measure viscous media?

A: The flat diaphragm structure is designed to help reduce scaling, adhesion and clogging associated with viscous media. The actual application should be evaluated according to the medium and operating conditions.

Q: What pressure connections are available?

A: M20×1.5 and clamp-type connections are available. Clamp options include ISO 1S, 1.5S and 2S, with customized connections available.

Q: Can it be used with high-temperature media?

A: The specified operating temperature is -20 to 150°C. For media above 100°C, suitable cooling devices or capillary remote seals may be required depending on the installation.

Q: What materials are compatible with the measured medium?

A: The standard configuration is intended for gases and liquids compatible with 316L stainless steel. Special corrosive media should be evaluated separately.

Q: How does Danrui ensure product quality?

A: According to the supplied information, each transmitter undergoes 100% factory testing, including high-temperature burn-in, accuracy calibration and functional validation. Production data is tracked through an MES system for batch traceability.

Q: What is the warranty period?

A: The stated standard warranty is 12 months from the date of shipment.

Product Summary

The TS110-AP Pressure Gauge Horizontal Meter Head (G1/2, Flat Diaphragm, Three Cooling Fins) combines a flush diaphragm structure, multiple output options and flexible process connections for industrial pressure measurement. Its design is particularly suitable for applications involving viscous, adhesive or clogging-prone media.

With pressure ranges up to 60MPa, accuracy options down to 0.15% FS, 4–20mA + HART support, multiple electrical connections and 316L-compatible media, the TS110-AP can be configured for a range of process control applications.

For B2B customers requiring pressure measurement solutions for food, pharmaceutical, brewing, chemical, petroleum and other industrial applications, Danrui Sensor (Suzhou) Co., Ltd. supports product selection, customized configurations and technical requirements.